Page 12 - Demo

Page | 12%u00b7 Boots and Aprons - protection from wet environments.%u00b7 Dust Masks - TPCG employees will not be permitted to be engaged in tasks requiring negative pressure or positive pressure respirators. Dust masks or particle masks are permissible and recommended for nuisance dust exposures.Machinery and Equipment%u00b7 Your on-site supervisor will provide you with instructions on the safe operation of all equipment and machinery. You will also be informed about the operation of all safety devices and equipment guards. Do not operate equipment until you have received these instructions.%u00b7 Never attempt to tamper with or bypass any machine safety device or guard.%u00b7 Do not operate any machinery that has broken, defective, or missing safety devices or guards. Notify your on-site supervisor immediately if such a condition exists.%u00b7 Notify your TPCG supervisor immediately if you are asked to operate unsafe machinery or equipment.%u00b7 Never assume that the power is off to any piece of equipment. Your on-site supervisor will inform you of your restrictions as an affected employee under the customer's Lockout/Tagout Program.%u00b7 Never place any part of your body into the point of operation of any machine.%u00b7 Do not attempt to perform maintenance or service on any of the client's equipment.%u00b7 Do not wear loose clothing, rings, and jewelry or allow hair to dangle when operating machinery.%u00b7 Always wear required personnel protective equipment.Mobile Powered Equipment%u00b7 Do not operate any forklift devices, pallet jacks, tractors, construction equipment, or mobile powered machinery unless you have the written approval of your TPCG Recruiter.%u00b7 Also, you must be able to meet the client's safe operation/certification requirements before you will be permitted to operate any equipment of this kind.Tools%u00b7 Always use the correct tool for the task.%u00b7 Do not use damaged tools.%u00b7 When using handheld electrical equipment, make sure there are no signs of physical damage to the equipment body, always check to see that the cord is not damaged, and the plug has no exposed wiring or missing prongs.%u00b7 Do not attempt to use any tools that you are unfamiliar with until you have received instruction and authorization.%u00b7 Wear safety glasses or goggles when using any pressurized air system.